Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 18.06.2025 05:27

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

so, what happens?

but I think this circuit , shows a few more pieces.

Is LGBTQ destroying the world?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Now when you have a certain ac resistance, then a current flows in a loop.

Upvotes:

My waist finally looks like how it did before I had kids but I didn’t lose weight. Why am I still 15 lbs from my starting weight?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

What are 5 ways that can be done by the community to improve the public transport system?

2024–10–16 [ OO OLAOYE OYEBODE ]

One

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Why does Nickelback, a popular Canadian alternative-rock band, receive so much hate? Is it because they are not considered "edgy" by some people?

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Can you write a poem or short story based on the first image that shows up on Pinterest?

The other is “what does a “fuse” do?”

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What do you think about Vivian Jenna Wilson's decision to speak out against her father, Elon Musk, in a public interview with NBC News?

A circuit breaker is similar, but is resettable.

In schematic diagrams this is the symbol for a fuse:

[old diagram got deleted by accident]

Why are daughters mean to their mothers?

2024–10–14 [Omar Gharbi Omar Gharbi ]

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

For this case there are devices called Metal oxide varistors (MOV).

Unreleased GeForce RTX 3080 Ti with 20GB memory spotted on eBay - VideoCardz.com

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

a photo is worth a thousand words.

If a person stops thinking one or two words in a second or half second means he had stopped thinking for half second?

He then asserts :

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

There are three different concepts here that are getting confused.

What if you were the only and last person left on Earth. How will you survive and what would you do with your life?

(Dc diagram shown, AC is similar).

An AC voltage/ current source, and an ac inductive load.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

What are some hard truths that MAGA needs to hear?

I post the exact comment here.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Is it better for 2nd generation Western Muslims to marry someone from their parents' country or a western Muslim who was born and raised in the West?

[image of Common-mode choke]

But it can get overloaded, and no longer works.

These devices are installed between the “hot” and “neutral” and protective ground.

What specific economic and social impacts would result if all climate change policies and regulations were immediately repealed worldwide?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

It seems Mohan does not understand the difference between a comment and an Answer.

But… the neutral is now “floating” because of the 1 ohm resistance.

Did you use the internet during the DOS era? Can you describe your experience? How were images displayed on the black screen when everything was just text-based commands?

Barnstars:

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

So, the voltage could go up to 500 volts, and the fuse will not open up.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

This is where the MOV conducts again, and dissipated the energy.

At one ohm, the resistor has a maximum of 1 watt power.

These are simplified answers to the original question, and does not change anything I wrote above.

The MOV will conduct when the voltage exceeds 50% of line voltage.

the problem then depends on "how fast does the fuse operate?".

eight

Can the fuse protect the electronic devices from lightning instead of a surge protector.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

The third is lightning and “how it gets conducted into a home.”

This is 'the assistant's answer'

A fuse is a non-resetable over current circuit protector.

What does a fuse do?

Edit 2024–10.

There are two important concepts here.

First Sentence:

This one hit behind the barn.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

He then describes the function of a fuse.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

nine

what exactly is a ‘surge’ protector?

It also is a device that limits the change in current flow.

The bolt then partially travels down the line to your home.

At least they know the answer if they wanted it.

Here is a simplified AC power diagram.

He then describes Rainy Season and Lightning.

Because the load is inductive, the current lags the voltage.(by a bit).

One is “what exactly is in a ‘surge protector’ ? ”

2024–10–10[John johnson John Johnson ]

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What is lightning?

but this device (an Inductor) … impedes the rapid changes in the current.

This device then solves the entire problem.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This is where this question deviates from being a 'generic' question, and becomes more specific.